Thursday, 19 March 2015

Urinary tract infections (UTI) 2

Principles of three different automated urine microscopy analysers - Sysmex UF1000i, Menarini sediMAX and Iris iQ200 
The use of automated system in urine analysis reduces the time and cost used in the manual routine analysis. In addition, automated system analyses a high number of samples in a short time (up to 100 samples per hour). There are a few methods available for automated system which includes the Sysmex UF1000i, Menarini sediMAX and Iris iQ200.

The Sysmex UF1000i method uses the urine flow cytometry technology to detect red blood cells, white blood cells, bacteria, epithelial cells and casts in urine. The automated system dilutes 200µL of the urine sample with citrate buffer solution and cationic surfactant with an addition of 40µL of fluorescent dye to complete the mixture. This mixture is then passed through a sheath of flow which is exposed to a laser beam to detect the particles in the stained urine sample with the fluorescent dye staining the nucleic acid in bacteria. The identification and characterisation of particles are based on the fluorescence intensity, forward scatter light and side scatter light intensity which generates electrical signal patterns by photomultiplier conversion which is then measured.

The Menarini sediMAX is an automated microscopy image based sediment analyser used in urine microscopy. The analyser produces a monolayer of urine sediment by centrifugation in a special cuvette. The sediment is analyzed by a bright field microscope and digital camera to capture and categorize 15 particle images based upon size and shape using image processing software. The digital images can be viewed by a trained laboratory staff with zoom capability. The instrument has a high sensitivity (>80%) in the detection of RBC and WBC but has a low sensitivity (approximately 50%) when compared with manual microscopy.

The Iris iQ200 method uses digital imaging and auto particle recognition to classify and quantify urine particles in uncentrifuged urine based upon size and shape. It classifies images such as WBC, RBC, bacteria, casts, yeast and crystals into categories. The digital images generated are collected, approximately 500 frames per sample, then viewed and classified by a trained laboratory staff. This is usually achieved without the use of manual microscopy.
The advantages and disadvantages of the automated urine systems (Sysmex UF1000i, SediMAX and Iris iQ200) are listed below.

Sysmex UF1000i
Uses uncentrifuged urine samples.
Improved bacteria counting and flags for UTI.
Urgent urine samples can be processed by operating the analyser manually.
Throughput of 100 samples per hour.
Cannot differentiate clinically significant pathologic casts cell from benign casts.
Manual microscopy is carried out on flagged results.
This analyser does not require any reagents.
Requires minimal laboratory technician training to interpret images that are similar to manual microscopy.
Results may be available for viewing from the stored digital images
Throughput of 80 samples per hour.

Yeast is mistaken for RBCs.
Epithelial cells are mistaken for WBCs.
Particle loss may occur due to the ultracentrifugation of urine samples.
Iris iQ200
Uses uncentrifuged urine samples.
Accurately quantifies bacteria.
Results may be available for viewing from the stored digital images
Throughput of up to 101 samples per hour.
Crystals are mistaken for RBCs.
There is no sufficient resolution in order to classify all dysmorphic RBC variants which prompt manual microscopy.
Requires considerable laboratory technician training for viewing digital images that are different from manual microscopy.

Detection of biochemical markers and their significance in urine samples
Biochemical markers in urine such as glucose, bilirubin, nitrite, ketone, specific gravity, blood, pH, protein, leukocytes and urobilinogen can be used for UTI. It can be done conveniently as a point of care test or near patients test outside the laboratory. This can be done manually (dipstick) or automated (Siemens Clinitek and Roche Urisys 1100).
A urine dipstick Bayer urinalysis strip such as the Multistix 10 SG is a narrow plastic strip with squares of different colours on it which represents each of the biochemical markers present. The strip is usually dipped in the urine sample to be tested and colour changes noted within 1 minute. The results are then interpreted as shown in the table below.

Table 2: Biochemical markers and its clinical relevance
Biochemical marker
Clinical relevance
Bacteria presence in urine
Leucocyte esterase
WBCs presence in urine
Possible liver disease
Possible liver disease or RBCs breakdown
Acidity of the urine sample and useful in interpretation of microscopic crystals
Product of fat metabolism
Specific gravity
Concentration of urine
Diabetes mellitus
Glomerular disease
RBC trauma or enzyme deficiencies

Automated systems such as Siemens Clinitek analyser is an easy to use chemistry analyser that is used to read Bayer urinalysis strip such as the Multistix 10 SG. The dipped urinalysis strip is inserted into the analyser and result reported automatically.
The Roche Urisys 1100 urine analyser is a semi automated analyser used for in vitro semi quantitative determination of urine analyte. It is a reflectance photometer designed to read and evaluate the results of urine test strips such as Chemstrip 10MD, Chemstrip 7 and Chemstrip 5 OB. The test strip is placed on the sliding tray and a stepping motor moves it under the reading head which remains stationary. The analyser then reads the reference pad followed by each of the pads on the strip. The reading head contains LEDs that emit light at various wavelengths. The LED emits light of a defined wavelength onto the surface of the test pad at an optimum angle. The light hitting the test zone is reflected proportionally to the colour produced on the test pad and is picked up by the detector, a phototransistor positioned directly above the test zone. The phototransistor sends an analog electrical signal to an A/D converter, which changes it to digital form. The microprocessor then converts this digital reading to a relative reflectance value by referring it to a calibration standard. Finally, the system compares the reflectance value with the defined range limits (reflectance values which are programmed into the analyzer for each parameter) and outputs a semi-quantitative result. Each test pad is read photometrically after about 55-65 seconds. In strongly alkaline urine samples, the Urisys 1100 Urine Analyzer automatically corrects the result of the specific gravity test.

Urinary tract infections (UTI) 1

Urinary tract infections can be defined as an infection that affects the upper (ureters and kidneys) and lower (bladder and urethra) urinary tracts. The Health Protection Agency (HPA) stated in 2009 that Urinary tract infections is the second largest healthcare associated infection and estimated that it causes up to 20% of all hospital acquired infections.
Urine microscopy is a method used to identify and quantify cells, bacteria and other materials such as casts in urine samples. This may include the use of an inverted microscope or automated system. Sysmex UF1000i automated analyser is in use for urine microscopy in my laboratory and manual microscopy is rarely performed on urines sample received. This is only done when a request specifically asks for cast cells as the UF1000i cannot differentiate them.  In addition, high risk urine samples are usually processed in Category 3 room without any microscopy performed.
Inverted microscope is a semi quantitative method of urine microscopy. The technique involves the use of micro-titre plate with the lamp or light source and condenser located at the top. The objectives, nose-piece and eye pieces are located below the stage. An aliquot (60 µl) is pipette from a well mixed urine sample and dispensed in the microtitre plate. The plate is then left to settle for 5 minutes and then examined within 15 minutes of dispensing under the inverted microscope using x20 objective lens. The number of RBCs and WBCs per urine sample is counted in two fields and the total number of cells reported as number/mm3. The microscopic results are then reported as <40/ mm3, 40-100/mm3, 100-200/mm3 and >200/mm3. This method is also useful for detecting casts in urine samples. It is also used on samples that cannot be processed using the automated analyser such as samples with thick pus, frank blood and requests for Trichomonas. There could be errors in the use of inverted microscope which includes volume discrepancies and uneven distribution of cells.
Alternatively, a drop of urine is placed on a microscope slide and examined under a normal light microscope using x40 objective lens and the results reported as follows
< 2 cells per hpf        -           < 50/mm3
2 - 5 cells per hpf     -           50 - 100/mm3
5 - 10 cells per hpf   -           100 - 200/mm3
> 10 cells per hpf     -           > 200/mm3

Occasionally, it might be necessary to dilute a urine sample for microscopy if the number of cells present is so large that it masked other cells. Urine samples with numerous white cells are double diluted in saline depending on the number of cells present and then multiply the result by 2. Urine samples with numerous red cells are double diluted in white cell diluting fluid to lyse any red cells present and then multiply the result by 2.

The significance of cells, (other than white cells) casts and pathological crystals that are found in urine are detailed below
Bacteria/Yeast cells 
When there is presence of >1000 bacteria cells per ml in a given urine sample, it usually indicates UTI. This is then followed up by culture. However, differentiation should be made between infection and contamination as normal skin flora could highlight a positive result. These cells if not treated could cause kidney infection by ascending through ureters. Yeast cells are reported as present or not present.
Red blood cells (RBC)
The presence of RBC in a urine sample does not necessarily indicate infection as small amount can be seen in healthy individuals and contamination could occur from menstruation in women and can be visibly detected, by automated urine analyser or with the use of a dipstick. However, in other individuals, high level of RBC in urine known as haematuria may indicate infection especially when the WBC is also elevated. Haematuria can also be seen in renal calculi, malignancy, trauma, stones and glomerulonephritis.
Epithelial cells
The presence of squamous epithelial cells in a urine sample usually indicate contamination from the perianal region.
Cast cells 
Cast cells which are cylindrical proteinaceous structures produced by the kidney and usually present and helpful in the diagnosis of renal infection. They are usually formed in the distal convoluted tubule and collecting ducts of nephrons present in the kidney where they then dislodge and can be seen in the urine. There are acellular and cellular cast cells.
Acelluler cast cells
-       Hyaline casts: Hyaline casts are cylindrical, clear and have a low refractive index. They are produced when Tamm-Horsfall protein aggregates and are usually seen in healthy patients, vigorous exercise or dehydration. 
-       Granular casts: Granular cast occurs as result of either degeneration or breakdown of cellular casts and appears like cigar-shaped, fine or coarse inclusions and with higher refractive index than Hyaline casts. They can be seen in chronic renal disease or after strenuous exercise. 
Cellular cast cells
-    RBC casts: The presence of RBC casts usually indicate glomerular bleeding or damage which can occur in glomerulonephritis. They can also be seen in renal infarction and subacute bacterial endocarditis. They appear as a cylindrical shape with or without ragged edges and yellow-brownish colour.
-   WBC casts: The presence of WBC casts usually indicate kidney infection or inflammation such as in acute pyelonephritis and acute allergic interstitial nephritis.
-      Epithelial cell cast: Epithelial cell casts usually occur when there is damage to the tubular epithelium and can be seen in acute tubular necrosis and when a toxic substance such as mercury is ingested.
Pathological crystal cells
The precipitation of crystals of uric acid, calcium phosphates,Calcium oxalate, triple 
phosphate and amorphous phosphate or urates in urine is called Crystalluria. This 
may be normal, asymptomatic or in association with the formation of urinary tract 
calculi. Crystals may form as a result of drug metabolism and can be seen in 
association with the pathological disease as seen in the presence of uric acid 
crystals in the urine of patient with chronic renal disease and gout. Cysteine crystals 
are rarely seen and may indicate an underlying disease. Bacterial infections caused 
by urea splitting bacteria such as Proteus spp. has been linked with the formation of 
urine stones (Ford 2010).
Ford M (2010). Fundamentals of Biomedical Science; Medical Microbiology. Oxford
University Press, London.
Health Protection Agency (2009). Trends in rates of Healthcare Associated Infection 
in England 2004 – 2008. Reports for the National Audit Office. London.